Apeks MTX-R Sidemount Regulator Kit

The Apeks MTX-R Sidemount Regulator Kit delivers the ultimate all-in-one package to meet the most demanding tec-divers needs. Including all the necessary equipment and hardware for sidemount diving, the MTX-R Sidemount kit lets you explore the most challenging diving environments with ease.

The MTX-R regulator has been designed around the military spec MTX regulator and has been tested to meet the US Navy Experimental Dive Unit requirements. It performs flawlessly in temperatures as low as 0.5*C at over 60m down. Very few regulators get near the performances of the Apeks MTX-R.

The kit includes two MTX-R regulator sets, the first comes in a short 65cm hose configuration with a right angled swivel hose attachment. The second regulator has a 210cm hose and straight swivel hose. Both of these offer improved ergonomics, to help when mounting your rig.

Kit Contents

  • 2 ea. MTX-R DIN 1st stages with 5 port swivel turrets.
  • 2 ea. MTX-R second stages.
  • 210cm double swivel hose.
  • 61cm double swivel hose
  • 2 ea. 25cm length MP inflation hoses (one for buoyancy system, one for drysuit)
  • 2 ea. TEK pressure gauges with 18cm hoses
  • 1 ea. 90° elbow fitting
  • 1 ea. bungee necklace
  • 1 ea. bungee clip
  • 1 ea. stainless steel bolt snap
  • 2 sets of short exhaust ports
  • Regulator bag
  • Setup illustration, CD manual and quick start guide
  • NOW INCLUDES THE NEW BUNGEE CONNECTOR SYSTEM

Key-Benefits

Apeks MTX-R 1st

  • Made For The Harshest Environments - Based on Apeks designs for the US military the MTX-R can withstand the harshest environments that any scuba diver will experience.
  • NEDU Certified - While most regulators are tested using the EN250a standard that requires the regulator to descend the 50m in water temperatures between 2 and 4 degrees the MTX-R has passed the NEDU (US Navy Experimental Dive Unit) requirements. This requires the regulator descends to over 60m metres at 10m per minute at a temperature of 0.5*C. It must then be maintained at that depth for 30 minutes at a constant breathing rate of 62.5 litres per minute with inspections for freeflow every 10 minutes before ascending at 18m per minute. The MTX-R is then given a final inspection for freeflow on the surface. This brutal inspection ensures the MTX-R is able to handle the most extreme environments like few other regulators.
  • Over-Balanced Diaphragm - The MTX-R features an overbalanced diaphragm. This ensures you can enjoy effortless breathing no matter what depth you’re at by counteracting the effect of the ambient water pressure constricting your hoses and impeding airflow.
  • Zero Ice Build-Up - To prevent ice build-up within the 1st stage the MTX-R features an over moulded end cap and environmentally sealed diaphragm ensuring it will never free-flow, even in the coldest water temperatures.
  • Ribbed Diaphragm Clamp & Body - The body of the 1st stage is ribbed increasing its surface area for superior heat transfer into it. This further prevents ice build-up causing free flow and increases the air temperature within the regulator for more comfortable breathing.
  • Rotating Head - Rotate the MTX-R head to route your hoses optimally.
  • 5 LP 2 HP Ports - The MTX-R features 5 Low Pressure Ports and 2 HP pressure ports, allowing you to install all of your dive gear and route your hoses optimally.
  • Single Piece Forged Body - The single piece forged body ensures the MTX-R is nearly indestructible and allows for improved thermal performance.

Apeks MTX-R 2nd Stage

  • Tuned Design - The Apex MTX-R 2nd has been optimally tuned to provide impeccable performance in any condition meaning it doesn’t need a venturi switch.
  • Pneumatically Balanced Design - The MTX-R provides gives you consistent, effortless breathing even when you’re running low on air thanks to its pneumatically balanced design.
  • Easy-use Purge Button - The purge is large and easy to use when wearing bulky gloves. It’s self-flushing and controllable.
  • Tough Build - The MTX-R Second stage is reinforced, allowing it to withstand whatever you throw at it. The front cover features an over-moulded elastomer over a chrome plated brass plate for robust durability. Large protective elastomer bumpers on the top and sides of the regulator protect it from damage.
  • Hose Mounting - The regulator in the short hoses configuration features a right-angle attachment, while the regulator with the long hose has a straight attachment, both providing superior ergonomics when you’re using your regulator.
  • Comfortable Air Temperate - A heat exchanger is situated around the valve mechanism. This increases the temperature of the air entering the regulator for more comfortable breathing.
  • Comfo-Bite Mouthpiece - Dive for hours in complete comfort with the Comfo-Bite Mouthpiece. It features a bridge that sits across the palate of your mouth preventing it from drying out and providing comfortable support for your 2nd stage.
  • Double Swivel Hose - The hose mounts swivel, reducing drag on your face for improved comfort.
  • Easy Servicing - The Apeks MTX-R is easy to maintain and service so you can keep enjoying it for years of dives to come.

Who is the Apeks MTX-R Sidemount Regulator Kit For?

Sidemount kits are the domain of technical divers, but today they’re becoming far more popular because of their ability to allow us to explore more challenging environments safely. The Apeks MTX-R sidemount kit represents truly top end performance, and any diver who wants the very best from their equipment need look no further than the MTX-R sidemount kit.

Who are Apeks?

Well known for their design and manufacturing of high quality breathing apparatus, Apeks supply more UK divers with regulators than any other dive manufacturer. Apeks has grown to become one of the benchmarks of the industry with superior standards in both engineering and design. Innovative development of not only their regulators but other diving equipment, Apeks offer a lifetime guarantee on all of their equipment, a testimony to the reliability and quality.

Apeks MTX-R Sidemount Regulator Kit

Connections DIN only
Type of first stage Over-balanced diaphragm design, environmentally sealed
Body Type Forged first stage body with heat exchanging ribs for maximum thermal performance.
Number of HP ports 2 (7/16" UNF) per first stage
Number of MP ports 5 (3/8" UNF) per first stage
Environmental Dry Kit Standard
First stage exterior Satin chrome
Orientation Convertible LH or RH
Coldwater Use Yes
Type of second stage Pneumatically balanced
Opening Effort Control Knob No
Integrated Venturi Lever No
Mouthpiece Comfo-bite™
Exhaust tee Diver Changeable - comes with 2 sets
Heat Exchanger for freezing resistance Yes
Hose type Rubber breathing hoses and braided flexi inflator hoses
Nitrox compatible Yes to 40% O2 when new, out of the box / Can be O2 cleaned to 100%.
Gauge face Tempered glass
Over-pressure relief on gauge back Yes

in the same category

16 other products in the same category:
Product added to compare.